Adding Languages to Your System

If you would like to pick a language other than "English (United States)" as your main language, follow these instructions: Important: make sure your computer is connected to the Internet via hard wire or wi-fi. make sure you are logged in as an Admin (see FAQ "(Very) Basic Getting-Started Guide (incl Admin password)" for default password info Please note that the support for languages varies. That is why you specify a Main language as well [...]

September 17th, 2019|Categories: , |

Basic Refurbishing Instructions

The Refurbishing Process: PCF maintains master computers that are cloned (replicated) using USB sticks/Flash Drives These master computers are configured with for different types of users. They include accounts for: Students with added protections Admins / Adults PCF account (in case Admins forget their password) After the master is set up the way we want it, we make an "image" of it. An image is a compressed file of the entire machine that can then [...]

September 17th, 2019|Categories: |

Access Keys for Boot Order & BIOS

To specify the drive you wish to boot from or to access the BIOS screen, repeatedly press the appropriate Function key immediately after turning on the computer. The Function Key to use/press depends on your computer brand/model. ASUS (most models) ESC to enter boot menu (choose pmap for USB). Delete or F2 to enter BIOS. Dell (most models) (see Lenovo above) HP (most models) F9 for boot. ESC or F10 for BIOS Lenovo (most models) [...]

December 12th, 2017|Categories: |

How to Connect Your Desktop

Step 1 - Placing the equipment Decide where you want your computer to go Make sure you have a working Internet connection nearby (in wall or router) Make sure power is nearby Set up a table/s for the computer/s Decide how to make do with the room you have Do not connect any wires until you are sure where your equipment will go Start by putting the keyboard/s and mice on the table where you [...]

October 12th, 2017|Categories: |

Complete Xubuntu Documentation

Since early 2016, PCF has been using Xubuntu for all of our computers. Xubuntu is a Debian/Ubuntu based operating system that is bosh fast and user friendly. We are using version 16.0.4 which is supported until April of 2019. If you are interested, the full user documentation for version 16.0.4 is located here: https://docs.xubuntu.org/1604/user/C/index.html  

September 22nd, 2017|Categories: |

Wi-Fi Networks Do Not Show Up

On the top right of your desktop screen, you will find the time and some smaller icons for networking, bluetooth, volume, etc. To connect to a Wi-Fi network, simple choose the network from the list of available networks in the networking dropdown (top right). If no networks appear, first make sure the "Enable Networking" is checked/on in that menu. Then also make sure the "Enable Wi-Fi" is enabled as well. If Wi-Fi is not shown [...]

September 22nd, 2017|Categories: |

Battery Not Holding a Charge

If your computer's battery does not hold a charge (for long) then likely your battery or charger are damaged. This can happen due to age and/or physical damage. If the battery LED on your laptop intermittently flashes amber or red, then there may not be much you can do. Remove the battery and re-install it to make sure this isn't the problem. If that didn't work, you can contact us to see if we are able [...]

May 30th, 2017|Categories: |

Beeps (1-3-4-3) upon startup

If your computer beeps (1 beep-3-4-3) but doesn't boot then this is often a memory related issue. Please try the following: Unplug the power cord Remove the memory chips from the machine Make sure they are the same size and speed and inserted into the right slots (blue before green and typically inside before outside ordering). Start with one stick. Repeat these steps to add another Often times just removing the memory and reinserting them [...]

May 30th, 2017|Categories: |

Loud fan but not starting up

If your computer's fan sounds like it is going on full blast but your computer is not starting up, please try the following: Unplug your computer Press and hold the power button for 30 seconds (to drain the battery completely) plug everything back in and try again Leave the system on for up to an hour. Sometimes it is going through a series of diagnostic tests and may come up normal upon completion.  

May 30th, 2017|Categories: |